4PCS WS2813 6Pins 5050 RGB DC5V

Product Description

4PCS WS2813 6Pins 5050 RGB DC5V

WS2813 is a set of control circuit and light-emitting circuit in one of the intelligent external control LED light source. Its appearance and a 5050LED lamp beads the same, each component is a pixel. Pixel interior contains intelligent digital interface data latching signal shaping amplification drive circuit, anti-reverse circuit, also includes high-precision internal oscillator and high precision constant current control module, effectively ensuring the pixel point light color consistent. Has a unique breakpoint transfer function, to achieve two-way signal transmission, a single pixel in the case of damage, does not affect the overall color display. Data protocol using single-line zero-code communication, pixel reset after power-on, DIN-side receiver from the controller to transfer data from the first sent over the 24bit data is the first pixel after extraction, sent to the pixels inside Of the data latch, the rest of the data through the internal shaping circuit shaping after amplification through the DO port forwards the output to the next cascade of pixels, each passing through a pixel, the signal is reduced by 24bit. Pixels using automatic shaping forwarding technology, making the number of cascade of the pixel from the signal transmission limit, only limited signal transmission speed requirements. BIN end receives the data signal swallowed 24bit data, and DIN data comparison, if the DIN terminal no signal, BIN side has received the signal, switch to the BIN terminal to receive input signals to ensure that one of the IC damage will not affect the signal level The control IC remains in the BIN port to receive the state, until the next power-off after re-confirmed. Up to 2KHZ port scan frequency, capture in the high-definition camera will not flicker phenomenon, is ideal for high-speed mobile products. 250us or more of the RESET time, an interrupt will not cause a false reset, you can support a lower frequency, cheap MCU. WS2813 provides 15mA and 5mA two current versions, each version provides high-brightness version and cost-effective version, a total of 4 specifications.

6 feet built-in IC lamp beads Features:
     Intelligent reverse polarity protection, reverse power supply will not damage the IC.
     IC control circuit and LED point light source common a power supply.
     Control circuit and RGB chip integrated in a 5050 package components, constitute a complete external control pixel.
     Built-in signal shaping circuit, any one pixel after receiving the signal waveform shaping and then output to ensure that the line waveform distortion will not be accumulated.
     Built-in power-on reset and power-down reset circuit.
     Each pixel of the three primary colors can achieve 256 levels of brightness display, complete 16,777,216 colors of the true color display, scanning frequency of not less than 400Hz / s.
     Serial cascade interface, through a signal line to complete the data reception and decoding.
     Any two-point transmission distance of not more than 5 meters without adding any circuit.
     When the refresh rate of 30 frames / sec, the cascade number is not less than 1024 points.
      Data transmission speed up to 800Kbps.
      The color of light is highly consistent and cost-effective.
 
6 feet built-in IC lamp beads Advantages:
    Built-in IC lamp brightness is higher than the average brightness of the lamp beads

    All the lights inside the RGB three-color chip consistency

    Built-in drive IC performance and stability

    The use of hard plastic packaging anti-extrusion damage

    Absolute guarantee of quality products in the case of affordable prices

6 feet built-in IC lamp beads Product Composition:
WS2812S is a set of control circuit and light-emitting circuit in one of the intelligent external control LED light source. Its appearance is the same with a 5050LED lamp beads
One element is a pixel. Intra-pixel contains the intelligent digital interface data latching signal shaping amplification drive circuit, also includes a high-precision internal oscillator and programmable constant current control part, effectively ensuring the pixel color of the high degree of color consistency.
Data protocol using single-line return to zero code of communication, the pixel reset after power on, DIN-side to accept the data from the controller to transmit, first of all
Sent to the 24bit data is extracted after the first pixel, the pixel data points to the internal latch, the remaining data through the internal shaping processing circuit
After amplification through the DO port to start forwarding output to the next cascade of pixels, each passing through a pixel, the signal reduced by 24bit. Pixels
Point using automatic shaping forwarding technology, making the number of cascade of the pixel from the signal transmission limit, only limited signal transmission speed requirements.
LED has a low voltage drive, environmental protection and energy saving, high brightness, large scattering angle, good consistency, ultra-low power, long life and other advantages. Will control the electricity
Circuit integrated in the LED above, the circuit becomes more simple, small size, easier to install.

    6 feet built-in IC lamp beads Scope:
The main application areas
    LED full-color light-emitting string lights, LED full-color module, LED full-color soft light
Article hard light, LED guardrail tube.
     LED point light source, LED pixel screen, LED profiled screen, all kinds of electronic products,
Electrical equipment Marquee.