Currently Empty: €0,00
-€1,27
Beam photoelectric sensors, infrared shooting count sensor, the sensor module
€2,74
Attualmente disponibile su ordinazione con consegna prevista entro 60 giorni circa dall'acquisto.
| Quantità | Prezzo Unitario |
|---|---|
| 12 - 49 | €2,46 |
| 50 - 99 | €2,19 |
| 100 + | €1,92 |
Product Description
Beam photoelectric sensors, infrared shooting count sensor, the sensor module
A, Long Size: 32mm x width 11mm X 20mm high
B, the main chip: LM393, on the radio-infrared head
C, the working voltage: DC 5 Volt
D, characteristics:
1, with the directions of the signal output.
2, single-channel signal output.
3, the output valid signal is low.
4, the sensitivity is not adjustable.
5, the workpiece can be used for counting, motor speed. . . .
6, the output switch board!
B, the main chip: LM393, on the radio-infrared head
C, the working voltage: DC 5 Volt
D, characteristics:
1, with the directions of the signal output.
2, single-channel signal output.
3, the output valid signal is low.
4, the sensitivity is not adjustable.
5, the workpiece can be used for counting, motor speed. . . .
6, the output switch board!
Module Features:
1, the use of imported groove coupler sensor
2, the groove width of 10mm.
3, the output state indicator lamp output high, output low lights.
4, block, output high; unobstructed, output low.
5, the comparator output signal clean, good waveform, driving ability, more than 15mA.
6, the working voltage of 3.3V-5V
7, the output format: digital switching outputs (0 and 1)
8, a fixed bolt holes for easy installation
9, small plates PCB size: 2.3cmx2cm
10, using a wide voltage LM393 comparator
Module for use:
1 module slot unobstructed when the receiver turns on, the module DO output low, while blocking, DO output high;
2 can be connected to the relay module DO composition limit switch functions, the buzzer may be connected to the active module, consisting of alarms.
1, the use of imported groove coupler sensor
2, the groove width of 10mm.
3, the output state indicator lamp output high, output low lights.
4, block, output high; unobstructed, output low.
5, the comparator output signal clean, good waveform, driving ability, more than 15mA.
6, the working voltage of 3.3V-5V
7, the output format: digital switching outputs (0 and 1)
8, a fixed bolt holes for easy installation
9, small plates PCB size: 2.3cmx2cm
10, using a wide voltage LM393 comparator
Module for use:
1 module slot unobstructed when the receiver turns on, the module DO output low, while blocking, DO output high;
2 can be connected to the relay module DO composition limit switch functions, the buzzer may be connected to the active module, consisting of alarms.
Abbiamo disponibili datasheet di tutti i componenti, qualora non fosse presente nella scheda download del prodotto inviaci un messaggio dal modulo contattaci e lo pubblicheremo il prima possibile nel nostro sito.
Be the first to review “Beam photoelectric sensors, infrared shooting count sensor, the sensor module”
You must be logged in to post a review.
There are no reviews yet.