Currently Empty: €0,00
-€3,00
PoE Injector / PoE Power Adapter
€4,26
In stock (can be backordered)
| Quantità | Prezzo Unitario |
|---|---|
| 12 - 49 | €3,84 |
| 50 - 99 | €3,41 |
| 100 + | €2,98 |
Product Description
Item specifics
- is_customized:
- Yes
- Products Status:
- Stock
- Brand Name:
- PoE kit
- Type:
- Cable Adapter
- Package:
- Yes
- Cable length:
- 150mm
- Power jack size:
- 5.5mm*2.1mm
- Application:
- Network power supply
- Color:
- White
- Place of Origin:
- Guangdong, China (Mainland)
Product Description
PoE Cable Kit, Adpater Kit Passive PoE Splitter&Injector 50 pair/lot,POE KIT Cable Adapter
PoE Cable, PoE Kit
1pcs Splitter+1pcs Injector
The complete Passive Power over Ethernet SET contains two pieces – INJECTOR and SPLITTER. It is suitable for using with products that basically do not support Power Over Ethernet. Passive Power Over Ethernet SET is applicable for wide range of network products such as Access Points, Routers, IP cameras, modems, switches, embedded computers or other network devices. Passive Power over Ethernet SET is compatible with most devices available on the market such as D-Link, Linksys, Airlive, Senao, Wline, Micronet, Edimax etc. The devices can be supplied standardly up to 50V. (The power adapter is not included – it is possible to use the power adapter of the powered device as access point, IP camera etc.) Passive PoE`s range is normally form 30-40 metres/100-130 ft (the real distance depends on the power supply, type of cable and powered device).
1. It is very simple to connect a passive PoE. On the lower part, we connect the Ethernet
RJ connector of passive PoE to the PC, Hub or Switch and connect the power adapter
to the power socket.
2. On the opposite end (RJ socket) we connect the Ethernet cable leading to the far end.
3. At the far end, we connect the end of the Ethernet cable to the RJ socket and connect
the power connectors and the Ethernet to the powered equipment. The equipment is now
connected by them.
Contains: INJECTOR and SPLITTER.
Complete set for wide range of network products such as Access Points, Routers, IP cameras, modems, switches, embedded computers or other network devices such as D-Link, Ovislink, Senao, Wline, RouterBOARD, WRAP boards and other devices using passive POE injection.
Connector Barrel size is 2.1mm (5.5 x 2.1 mm)
Power Pins 4,5 + and 7,8 –
1. It is very simple to connect a passive PoE. On the lower part, we connect the Ethernet
RJ connector of passive PoE to the PC, Hub or Switch and connect the power adapter
to the power socket.
2. On the opposite end (RJ socket) we connect the Ethernet cable leading to the far end.
3. At the far end, we connect the end of the Ethernet cable to the RJ socket and connect
the power connectors and the Ethernet to the powered equipment. The equipment is now
connected by them.
Abbiamo disponibili datasheet di tutti i componenti, qualora non fosse presente nella scheda download del prodotto inviaci un messaggio dal modulo contattaci e lo pubblicheremo il prima possibile nel nostro sito.
Be the first to review “PoE Injector / PoE Power Adapter”
You must be logged in to post a review.
There are no reviews yet.